There are three ways to disinfect with your Swift 5x.
Method 1: Dock, charge, disinfect multiple devices at once.
Step 1: Open a tray and place your device in the basket.
Step 2: To charge the device, plug into the USB port at the back of the tray. Please note that USB charging cables are not provided.
Step 3: Close the tray.
Step 4: Repeat until all devices are in the unit as needed. The unit will automatically begin charging and disinfecting after 7 seconds once a device is plugged into any of the USB ports and all trays are closed. You do not have to press the start button if you’re charging as well as disinfecting.
Step 5: The unit automatically locks when the disinfection cycle is in process. You will not be able to open the trays or remove devices until the cycle completes.
Step 6: The cycle is complete when all the “DISINFECTING” lights are solid blue.
Method 2: Disinfect a single device on the fly.
Step 1: Open any tray and place your device in the basket.
Step 2: Close the tray.
Step 3: Press and hold the number on the keypad that corresponds to the tray you are disinfecting to start a disinfection cycle.
Step 4: Wait for the disinfection cycle to complete.
Step 5: Open the tray and remove the disinfected device.
Method 3: Disinfect multiple devices on the fly.
Step 1: Open any tray and place your device in the basket.
Step 2: Close the tray.
Step 3: Repeat steps 1 & 2 until all devices are in the unit.
Step 4: Press and hold the start button to disinfect all trays.
Step 5: The unit automatically locks when the disinfection cycle is in process. You will not be able to open the trays or remove devices until the cycle completes.
Step 6: The cycle is complete when all the “DISINFECTING” lights are solid blue.
*All trays must be closed for the disinfection process to begin.
**Press the stop button if you need to interrupt the disinfection cycle.
*All trays must be closed for the disinfection process to begin.
**Press the stop button if you need to interrupt the disinfection cycle.